engine driven hot water high pressure washers for marine environment
HW KART INOX
Independent high-pressure cleaners that incorporate all the quality and reliability features of the HW KART range and also allow the use of sea water.
Made of AISI 316 L stainless steel, the only steel that can withstand the corrosive action of the marine environment.
PROFESSIONAL HIGH-PRESSURE CLEANERS BUILT USING
ONLY THE VERY
BEST COMPONENTS
Motori servizio continuo S1
I motori elettrici offrono elevate prestazioni stabilizzando la temperatura di esercizio in valori costanti per un utilizzo illimitato grazie al servizio continuo in S1.
La potenza del motore scelta per l’accoppiamento alle pompe è sempre sovradimensionata in modo che la potenza richiesta dalle pompe non raggiunga mai i valori massimi disponibili.
Pompe professionali 1450 rpm
Le pompe in linea a 3 pistoni in ceramica sono ampiamente sovradimensionate, permettendo l’utilizzo solo parziale della pressione massima per cui sono state progettate.
Questa caratteristica, unitamente a quella dei motori elettrici in servizio continuo S1, permette alle idropulitrici Indra di lavorare senza pause di raffreddamento.
L’accoppiamento pompa-motore non è diretto, bensì è realizzato mediante giunto elastico per permettere che nel tempo, in caso di rottura del sistema di accoppiamento, l’intervento sia di lieve entità e rapido e non con la prospettiva di grosse operazioni di sostituzione di componenti.
Sistemi di sicurezza avanzati
Le idropulitrici Indra sono dotate di una solida scheda elettronica, specificamente progettata, che gestisce le funzioni della macchina e tutte le segnalazioni.
Tutte le funzioni e segnalazioni vengono gestiti in completa sicurezza, garantendo la risoluzione immediata di eventuali guasti. La gamma è infatti dotata di sicurezze avanzate e la scheda elettronica segnala al riparatore, con appositi led posti sul circuito stampato, il corretto funzionamento o eventuali avarie dei componenti elettrici. Vi è inoltre una segnalazione completa delle funzioni direttamente sul pannello comandi per consultazione e controllo da parte dell’utilizzatore.
areas of application
• High pressure and high temperature cleaning in offshore fish farms • Offshore platforms • Coastal municipalities • Shipyards, fishing vessels • All kinds of high-pressure cleaning in places where corrosion-resistant equipment is needed.
Designed to withstand the corrosive action of the marine environment
Built to last and for non-stop operation.
High-performance, silent, independent hot water high-pressure washers, with structure and bodywork in AISI 316 stainless steel, designed to resist the highly corrosive action of the marine environment.
Designed to be supplied with seawater, they are indispensable for offshore applications.
Versions with a very high efficiency single boiler are available, as well as models with large water flow rates equipped with a double boiler for high temperatures.
Reliable components and an integral AISI 316L stainless steel construction ensure resistance to extreme conditions such as those in the marine environment.
The integral bodywork reduces noise emissions and is designed to withstand extreme working environments. The solid metal structure is equipped with a double anti-vibration system.
Versions on wheels are available, equipped with 2 fixed pneumatic rear wheels and 2 pivoting pneumatic front wheels with brake, and also skid versions, with AISI 316 L stainless steel base and rubber feet.
Both can be fitted with hooks for aerial handling with lifting equipment.
THE HW KART INOX RANGE IS DESIGNED TO RESIST THE CORROSIVE ACTION OF THE MARINE ENVIRONMENT AND IS DESIGNED FOR THE USE OF
SEA WATER
All metal parts are made of AISI 316L stainless steel, the only steel that can withstand the salinity of the marine environment.
DISCOVER THE MODELS
IN DETAIL
technical data
| MODEL | PRESSURE | DELIVERY | PUMP SPEED | ENGINE POWER | ENGINE TYPE | HEATERS | TEMPERATURE | DIMENSIONS |
|---|---|---|---|---|---|---|---|---|
| HW KART INOX 21.200 | 200 BAR | 21 L/min | 1200 rpm | 20 HP | KUBOTA DIESEL | n° 1 | 70 °C * | 143x80x95 cm |
| HW KART INOX 17.300 | 300 BAR | 17 L/min | 1000 rpm | 20 HP | KUBOTA DIESEL | n° 1 | 80 °C * | 143x80x95 cm |
| HW KART INOX 25.250 2B | 250 BAR | 25 L/min | 1450 rpm | 26 HP | KUBOTA DIESEL | n° 2 | 90 °C * | 175x87x105 cm |
| HW KART INOX 30.200 2B | 200 BAR | 30 L/min | 1450 rpm | 26 HP | KUBOTA DIESEL | n° 2 | 85 °C * | 175x87x105 cm |
| HW KART INOX 40.150 2B | 150 BAR | 40 L/min | 1450 rpm | 26 HP | KUBOTA DIESEL | n° 2 | 70°C * | 175x87x105 cm |
*The temperature values indicated are calculated at the maximum flow rate.
DISTINCTIVE FEATURES
of the range
Sound-absorbing integral bodywork designed to withstand extreme working environments subject to corrosion: • AISI 316 stainless steel structure with double anti-vibration system, with openable body in AISI 316 stainless steel • The skid version is equipped with a stainless steel base designed to be fixed to a base • Three ceramic piston pump with rod operation • Kubota three-cylinder, water-cooled • Pump-engine coupling by means of belts and pulleys • High-efficiency diesel boiler, (two in the Hw Kart stainless steel 2B version), running on 12V current generated by an alternator • Control panel with starting key • Electric start • Automatic variation of engine revs. by operating the gun • Steam valve • Pressure control valve • Safety valve • Water filter • Built-in 35L diesel tank.
CONTROL PANEL
Complete and intuitive control panel: • General engine start key • Engine control lights • Engine operating hours counter • Boiler start switch • Voltage indicator • Low fuel light • Thermostat • Pressure gauge • Pressure and flow control valve • Emergency stop button.
- Control of all functions and advanced safety systems with LED signalling on the control panel:
- Stop indication for combustion control system intervention.
- Fuel reserve warning light.
- Hour meter.
- Emergency stop button.
- Available in various engines.
- Versions on wheels or skid.
- The high-flow HW Kart INOX models achieve high temperatures thanks to the high-efficiency double boiler system.
resistant to salinity
All models are made of AISI 316 stainless steel and are resistant to corrosion due to both the salinity of seawater and the atmosphere in a marine environment. The following are made of AISI 316 stainless steel: the body, the supporting structure, the boilers, the coils and the mechanical parts of the low and high pressure hydraulic circuits. Some parts are also protected with special anti-corrosion paint coatings.
use of seawater
The hydraulic circuit is also made of AISI 316 stainless steel, allowing the use of sea water. A feed pump supplies the machine, which automatically discharges into the sea when the high-pressure pump is stopped.
Efficiency and savings
The combination of very high efficiency, a generously sized coil and a low smoke outlet temperature allows the use of diesel nozzles with minimal flow rates while easily reaching set temperatures. Ignition times are therefore much reduced, resulting in lower fuel consumption and considerable cost savings.
High efficiency, high performance boiler unit
- Boilers running on 12V current, which eliminates the need for an additional power generator.
- Made of AISI 316 L stainless steel.
- Low flow diesel nozzles and high temperatures.
- Low emissions: between 0 and 1 on the Bacharach scale.
- High efficiency and fuel savings.
- Self-cleaning boiler bottom, made of refractory cement.
- AISI 316 L stainless steel fans, resistant to corrosion and vibrations over time.
- Efficiency 91%.
are you interested in independent high pressure washers for the marine environment?
We will be happy to help you choose the best pressure washer.
STANDARD ACCESSORIES
FOR PROFESSIONAL USE
The accessories are designed for professional and industrial use, in compliance with safety regulations.
The 15 m high-pressure hose supplied with the machine allows even large equipment to be washed at a safe distance from the cleaner. On request, we supply longer hoses to facilitate the washing of large structures.
on demand
- Manual or automatic hose reel in stainless steel.
- Stainless steel chimney extension.
standard
- 15m blue non-staining high pressure hose.
- Spray gun.
- Lance.
- High pressure nozzle.