professional cold water high pressure washers
FLECTOR
Professional cold water high pressure washers, electrically powered, with robust stainless steel frame. HT versions are also available, equipped with pumps specifically designed to receive hot water at a maximum temperature of 85°C.
DESIGNED to last
and FOR CONTINUOUS OPERATION
Professional high pressure washers suitable for heavy-duty use.
Being compact and easy to handle, they are also ideal for all tasks where speed of execution and ease of transport are essential.
They are designed to be long-lasting as the bodywork has no painted steel parts, which are prone to rust.
Flector is a high-pressure cleaner equipped with large-diameter rear wheels allowing easy transportation, overcoming any obstacle. They do not have plastic body parts that can quickly become fragile and discoloured.
Specific models for marine environment and seawater use are also available, with structure, pump and water circuit in AISI 316 stainless steel.
VERSIONS SUITABLE FOR THE MARINE ENVIRONMENT
IN STAINLESS STEEL
FOR SEAWATER USE
Heavy duty motors
The electric motors offer high performance by stabilising the operating temperature at constant values for unlimited use thanks to their heavy duty classification.
The motor power chosen for coupling to the pumps is always oversized so that the power required by the pumps never reaches the maximum available values.
In particular, an 8.5HP motor is used for the Flector 21.150 model, rather than a 7.5HP motor that is commonly used, which is completely insufficient.
1450 rpm professional pumps
The 3-piston ceramic inline pumps are largely oversized, allowing only partial use of the maximum pressure for which they were designed.
This feature, together with that of the heavy duty electric motors, allows the high pressure washers Flector to operate without cooling pauses.
The pump-motor coupling is not direct, but is made by means of a flexible coupling so that over time, in the event of a failure of the coupling system, the intervention will be minor and rapid and without the prospect of major component replacement.
Advanced safety systems
Flector high-pressure cleaners are equipped with a robust, specially designed electronic board that manages machine functions and all signals.
The control panel signals any possible anomalies: lack of water supply (with safety shutdown); possible micro-leaks (with safety shutdown); protection against unintentional resetting of the machine after a power failure: It is often the case that, due to forgetfulness, the high-pressure cleaner is not switched off by the operator during a power cut. A special safety system prevents the high-pressure cleaners from restarting automatically when the power comes back on: the operator must voluntarily switch the machine on again. If left on, Flector also switches off automatically after 60 minutes of inactivity.
Models with AISI 316L stainless steel pumphead suitable for the food industry are available on request. On request, we supply versions with non-marking wheels for the medical and agri-food sectors.
The Flector range is versatile and ideal for professional use as well as for the thorough cleaning and maintenance of outdoor floors in homes.
The included high-pressure hose – 15m long! – is coated with non-staining rubber to prevent the hose from leaving marks on surfaces.
powerful and versatile high-pressure cleaners
Cold water high pressure washers with stainless steel frame and cover, for professional and industrial use. Ideal for many sectors: agriculture, mechanical workshops, construction and vehicle washing.
Cold water high pressure washers ideal for cleaning vehicles, indoor and outdoor surfaces such as courtyard and driveway floors, walls, stonework, warehouses and any work environment where incrustations form.
They are also professional high-pressure cleaners that are very effective in removing dirt and washing mechanical components.
In agriculture, they are indispensable for cleaning tractors, equipment, stables, milking parlours and wherever there is an accumulation of dirt, the removal of which requires a significant impact of pressurised water.
The flector range is manufactured in a solid stainless steel STRUCTURE
sturdy and powerful
Professional cold water high pressure washers ideal for many sectors: agriculture, mechanical workshops, construction, vehicle washing and outdoor flooring.
DISCOVER THE MODELS
IN DETAIL
- FLECTOR 15.150
- FLECTOR 15.200
- FLECTOR 18.160
- FLECTOR 21.150
- FLECTOR 15.150 HT
- FLECTOR 15.200 HT
- FLECTOR 21.200
- FLECTOR 30.200
- FLECTOR 18.300
- FLECTOR 21.200 HT
TECHNICAL DATA
MODEL | PRESSURE | DELIVERY | MOTOR POWER | POWER SUPPLY | INLET MAX. WATER TEMPERATURE | DIMENSIONS |
---|---|---|---|---|---|---|
FLECTOR 15.150 | 150 BAR | 15 L/MIN | 5,5 HP | 3ph - 4,7kW | 45°C | 76x56x87 cm |
FLECTOR 15.200 | 200 BAR | 15 L/MIN | 7,5 HP | 3ph - 6,5 kW | 45°C | 76x56x87 cm |
FLECTOR 18.160 | 160 BAR | 18 L/MIN | 7,5 HP | 3ph - 6,5 kW | 45°C | 76x56x87 cm |
FLECTOR 21.150 | 150 BAR | 21 L/MIN | 8,5 HP | 3ph - 7,7 kW | 45°C | 76x56x87 cm |
FLECTOR 21.200 | 200 BAR | 21 L/MIN | 10 HP | 3ph - 8,8 kW | 45°C | 93x58x91 cm |
FLECTOR 30.200 | 200 BAR | 30 L/MIN | 15 HP | 3ph - 13 kW | 45°C | 93x58x91 cm |
FLECTOR 18.300 | 300 BAR | 18 L/MIN | 15 HP | 3ph - 13 kW | 45°C | 93x58x91 cm |
MODEL | PRESSURE | DELIVERY | MOTOR POWER | POWER SUPPLY | INLET MAX. WATER TEMPERATURE | DIMENSIONS |
---|---|---|---|---|---|---|
FLECTOR 15.150 HT | 150 BAR | 15 L/MIN | 5,5 HP | 3ph - 4,7kW | 85°C | 76x56x87 cm |
FLECTOR 15.200 HT | 200 BAR | 15 L/MIN | 7,5 HP | 3ph - 6,5kW | 85°C | 76x56x87 cm |
FLECTOR 21.200 HT | 200 BAR | 21 L/MIN | 10 HP | 3ph - 8,8kW | 85°C | 93x58x91 cm |
DISTINCTIVE FEATURES
Sturdy and professional: • Stainless steel construction • Two 300mm diameter wheels • One pivoting wheel with brake (for up to 8.5 HP) • Two pivoting wheels, one with brake (for 10 and 15 HP) • Three ceramic piston pump with rod operation and moulded brass manifold • 1450 rpm electric heavy-duty motor • Pump-motor flexible coupling • Pressure control valve • Water filter.
The simple and intuitive 24V control panel is complete with: • ON/OFF switch • Power on indicator light • Pump start indicator light.
The Flector range is equipped with advanced safety systems that clearly indicate any possible anomalies on the control panel: machine stop for lack of water; Shutdown for micro leaks or shutdown after 60 minutes of inactivity; shutdown in the event of power return after a power failure with the need to reset the machine and, on request for HT version – specific for receiving water at high temperature – shutdown due to supply water overtemperature.
- Designed to last
- Robust stainless steel frame
- Continuous duty motors
- Professional rod pumps with ceramic pistons 1450 rpm
- Pump-motor flexible coupling
- Available with wheels for the food industry
- Dedicated electronic board with all functions control
- Timed total stop ITTS
- Micro-leaks Control
- Equipped with all safety features
DISTINCTIVE FEATURES
OF THE RANGE
Sturdy and professional: • Stainless steel construction • Two 300mm diameter wheels • One pivoting wheel with brake (for up to 8.5 HP) • Two pivoting wheels, one with brake (for 10 and 15 HP) • Three ceramic piston pump with rod operation and moulded brass manifold • 1450 rpm electric heavy-duty motor • Pump-motor flexible coupling • Pressure control valve • Water filter.
The simple and intuitive 24V control panel is complete with: • ON/OFF switch • Power on indicator light • Pump start indicator light.
The Flector range is equipped with advanced safety systems that clearly indicate any possible anomalies on the control panel: machine stop for lack of water; Shutdown for micro leaks or shutdown after 60 minutes of inactivity; shutdown in the event of power return after a power failure with the need to reset the machine and, on request for HT version – specific for receiving water at high temperature – shutdown due to supply water overtemperature.
- Designed to last
- Sturdy stainless steel frame
- Heavy-duty motors
- Professional 1450 rpm rod pumps with ceramic pistons
- Pump-motor flexible coupling
- Available with wheels for the food industry
- Dedicated electronic board with all functions control
- Timed total stop ITTS
- Micro-leaks control
- Equipped with all safety features
are you interested in professional cold water high pressure washers?
We will be happy to assist you in choosing the best pressure washer.
standard accessories for professional use
The accessories are for professional use, in compliance with safety regulations. The 15 m high-pressure hose supplied with the machine allows even large equipment to be washed at a safe distance from the cleaner.
150 - 200 BAR
- 15m blue non-staining high pressure hose.
- Gun with extension.
- Half-lance.
- High pressure nozzle.
300 BAR
- 15m blue non-staining high pressure hose.
- Gun.
- Specific lance for high pressure.
- High pressure nozzle.
ACCESSORIES on demand
- Manual hose reel for 20m high pressure hose.
- Rotating nozzle.
- Larger water filter.
- Sand kit.
- Foam lance.
STANDARD ACCESSORIES
FOR 150 - 200 BAR
- 15m blue non-staining high pressure hose.
- Spray gun with extension.
- Removable lance terminal for quick use of extra accessories.
- High pressure nozzle.
standard accessories
for professional use
The accessories are for professional use, in compliance with safety regulations. The 15 m high-pressure hose supplied with the machine allows even large equipment to be washed at a safe distance from the cleaner.
STANDARD ACCESSORIES
FOR 300 BAR
- 15m blue non-staining high pressure hose.
- Spray gun.
- Specific lance for high pressure.
- High pressure nozzle.
accessories
on demand
- Manual hose reel for 20m high pressure hose
- Rotating nozzle
- Larger water filter
- Sand kit
- Foam lance